非接触式电压测试仪 HIOKI 3258 的性能：

测量对象	被包裹的导线（IV、CV100mm2以上），金属端子 注：不能测量屏蔽电缆
AC/40Hz~60Hz	30.0V 到 420.0V, 380V 到 600V, 2档量程 (基本精度: ±1.5% rdg. ±5 dgt. /真有效值,在420.0V量程内测量适应40Hz 到400Hz )
波峰因数	1.8 (只限600V的正弦波)
对地间最大额定电压	600V AC rms
功能	保持数据功能，自动省电，低电池警报
显示	数字LCD ，最大。 4200dgt.(不满10dgt就消零 )
采样率	1.67次/秒 （约600毫秒/次） ，响应时间2.4秒或更少
消耗功率	5号锰干电池（LR6）× 6 ，连续使用： 14小时（电源ON，无测量） ，或1000次的1分钟测量，或200次的5分钟测量
体积及重量	51 W × 275 H × 37.5 Dmm （一探头）, 线长900mm，670g
附件	操作手册×1 ，携带盒×1 ， 5号锰干电池（LR6）×6

HIOKI 3258非接触电压测试仪的性能：

New Proprietary Technology from HIOKI - Model 3258 SAFETY HiTESTER
Non-metallic contact voltage testing ensures ultimate safety at the worksite

HIOKI is making available the world's first non-metallic contact voltage meter.
The new Model 3258 Safety HiTESTER contains no exposed metal parts, with everything including the measurement probes protected by insulating resin. Until now, voltmeters measured by connecting metal probe tips to metal conductors, a situation that is constantly open to the possibility of electric shock and short-circuit accidents. With the 3258, not only can you test for voltage using the traditional method, i.e., over metal conductors, you can now also measure voltage over insulated conductors simply by pressing the insulated non-metallic probe tips of against the covered wiring to ensure safe AND accurate measurement conditions. User safety is thus vastly improved.
Compatible with 100, 200 and 400V power lines, this model is ideal for a wide range of applications in electrical equipment maintenance and installation work.

SAFETY HiTESTER 3258

Voltage measurement safety assured by noncontact testing

• Non-Metallic contact for optimum safety
• Capture the voltage value of covered electric wires
• Also ideal for metallic busbars and terminals
• Optimized for 400 V AC circuits

Basic specifications (Accuracy guaranteed for 1 year)

Measurement object	Covered electric conductors (minimum 100 mm2), Metallic terminals Note: cannot measure shielded electric wires
AC Voltage 40 to 66 Hz	30.0V to 420.0V, 380V to 600V, 2ranges (Basic accuracy: ±1.5% rdg. ±5 dgt. /true RMS rectified, band width 40Hz to 400Hz at 420.0V range)
Crest factor	1.8 (only sine wave at 600V range)
Max. rated voltage to earth	600V AC rms
Functions	Data hold function, auto-power save, low battery alarm
Display	Digital LCD, max. 4200 digit, (zero suppress at 10 digits or less)
Sampling rate	1.67 times/sec (approx. 600 msec period), Response time 2.4 sec or less
Power consumption	AA alkaline (LR6) battery × 6, Continuous use: 14 hr (Power ON, no measurement), or 1-minute measurements for 1000 times, or 5-minute measurements for 200 times
Dimensions, mass	51mm (2.01in) W × 275mm (10.83in) H × 37.5mm (1.48in) D (one probe), 670g (23.6oz)
Supplied accessories	Operation manual × 1, Carrying case × 1, AA alkaline battery (LR6) × 6

单位汇款

个人汇款